Add to cart
Product added to the basket
The stock is insufficient - units have been added to cart
Out of stock
Sold out, please contact us by email to ask for availability
Minimum purchase quantity
The minimum purchase quantity is not reached
Warranty extension :
Terms of warranty :
Reconditioned BOSCH air flow meter 0280202118
Reconditioned air flow meter, original model BOSCH brand, reference 0280202118 specifically. This meter is a used model, refurbished to nine. The photo is non-contractual (product already sold) but represents very well the meters that we sell. We recover flow meters in good or very good condition. This results in complete disassembly for checking and testing of internal parts, followed by micro-blasting and complete repackaging.
The plastic cover is disassembled and then glued, traces of silicone glue may be present. The flow meter is then tested. If the result is not satisfactory, the meter is set aside for parts. We only ship tested and validated flow meters in good working order. Note that this is a used part and that traces of use may be present.
The installation of this meter does not require any particular technical knowledge because it is sufficient to connect it. However, it will be necessary to make positioning adjustments if your car no longer has its original air box.
This meter is a refurbished used model, it does not enjoy the legal warranty of the manufacturer. We nevertheless guarantee the part 6 or 12 months, from the date of invoice. Beyond that, any wear will not be taken under warranty. This information is contractual. If you have any concerns, simply contact us to play your warranty. Here are our detailed terms of warranty. We kindly ask you to read them and confirm your reading and your agreement.
The repackaging procedure consists of a first input check of the used part, to see if it is usable or not. If the flowmeter can be refurbished, it is completely and thoroughly disassembled for a first cleaning (removal of dust and possible other residues). This results in a cleaning by microbilage of the external metal surfaces and by simple washing for the plastic parts. We check upstream the proper functioning and condition of all components, and if necessary intervene in particular the electronic track, the flap, the flap, the valve and the duct. The electrical resistance is controlled. Some components may be replaced by original elements. At the discretion of the interventions, as an indication we could note that the malfunction of the flow meter is often related to the scratch wear of the potentiometer. It is this wear that changes the impedance, causing power losses, injection cuts and unstable idle. At the end of the reconditioning, this defect is corrected for the return to normal operation of the flow meter. In the end, the piece is tested. If the test is successful, the part is put in stock and available for sale on our site. A normal behavior of a car consists of a high idle (about 2000 rpm) the first 3/4 minutes cold, then a stabilization of the idle to slightly below 1000 rpm. As the engine reaches its optimum performance when hot, always warm it up before driving and drive the first 10-15 kilometers without forcing. It is in these conditions that you will see a linear acceleration / deceleration, without cuts, without jerks, including with a sportier driving.
Please enter the required fields!